LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hummer >> 2009 >> H2 V8-6.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Intake Manifold >> Service and Repair >> Upper Intake Manifold Sight Shield Replacement
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Upper Intake Manifold Sight Shield Replacement




Upper Intake Manifold Sight Shield Replacement

Removal Procedure




1. Lift upward on the front of the sight shield (1), then remove the sight shield from the sight shield retainer (2).




2. Remove the sight shield retainer bolts (1) and the retainer (2), if required.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the sight shield retainer (2) and the bolts (1), if required.

Tighten the retainer bolts to 5 Nm (44 lb in).




2. Install the intake manifold sight shield to the retainer (2), then push downward on the front of the sight shield (1) to lock in place.

Tighten the bolt to 10 Nm (89 lb in).

scientia non olet · About LEMON Manuals