Information Bus: Testing and Inspection

Inspection and Verification

CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle.
1 Verify the customer concern.
2 Visually inspect for obvious signs of mechanical or electrical damage and system integrity.





3 If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step
4 If the cause is not visually evident, check for Diagnostic Trouble Codes (DTCs) and refer to the DTC Index.

DTC Index
For a complete list of all Diagnostic Trouble Codes (DTCs) that could be logged on this vehicle, please refer to A L L Diagnostic Trouble Codes ( DTC ).
For additional information, refer to Diagnostic Trouble Code (DTC) Index - DTC: Body Control Module (BCM) Testing and Inspection