Front Fender: Service and Repair

FRONT FENDER PANEL REMOVAL/INSTALLATION

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the following parts:
a. Front bumper Front Bumper Removal/Installation

b. Front combination light Front Combination Light Removal/Installation

c. Front fender molding Cowl Grille Removal/Installation

d. Side step molding

3. Remove fasteners and bolts, then remove the front fender panel in the direction of the arrow shown in the figure.






4. Install in the reverse order of removal.

5. Adjust the headlight aiming. Adjustments