Front Combination Light Removal/Installation

FRONT COMBINATION LIGHT REMOVAL/INSTALLATION

WARNING:
- Incorrect servicing of the discharge headlights could result in electrical shock. Before servicing the discharge headlights, always refer to the discharge headlight service warnings. Service Precautions

1. Disconnect the negative battery cable. Removal and Replacement Removal and Replacement Removal and Replacement

2. Remove the front bumper. Front Bumper Removal/Installation

3. Disconnect the connector.






4. Remove the bolt A.

5. Remove the bolt B.

6. Remove the bolt C.

7. Remove the fastener.

8. Pull the front combination light in the direction of the arrow shown in the figure and remove the pin from the body.






9. Remove the front combination light.

10. Remove the bolts D.






11. Remove the bracket in the direction of the arrow (2) shown in the figure while pressing the bracket tabs in the direction of the arrow (1).






12. Install in the reverse order of removal.

13. Adjust the headlight aiming. Adjustments