Engine Oil Control Valve: Service and Repair

OIL CONTROL VALVE (OCV) REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5]

1. Remove the battery cover. Removal and Replacement

2. Disconnect the negative battery cable. Removal and Replacement

3. Remove the plug hole plate. Plug Hole Plate Removal/Installation

4. Disconnect the wiring harness.

5. Remove the ignition coils. Service and Repair

6. Remove the ventilation hose.

7. Remove the oil level gauge.

8. Remove the cylinder head cover. Service and Repair

9. Remove in the order indicated in the table.

10. Install in the reverse order of removal.