Mirrors: Testing and Inspection

POWER OUTER MIRROR INSPECTION

Up/down/left/right Adjustment Motor

1. Disconnect the negative battery cable.

2. Remove the inner garnish. Inner Garnish Removal/Installation

3. Remove the front door trim. Front Door Trim Removal/Installation

4. Remove the power outer mirror. Power Outer Mirror Removal/Installation

5. Apply battery positive voltage and connect the ground to the power outer mirror terminals and inspect the power outer mirror operation.











- If not as indicated in the table, replace the power outer mirror. Power Outer Mirror Removal/Installation





With Heated Outer Mirror

1. Disconnect the negative battery cable.

2. Remove the inner garnish. Inner Garnish Removal/Installation

3. Remove the front door trim. Front Door Trim Removal/Installation

4. Remove the power outer mirror. Power Outer Mirror Removal/Installation

5. Verify that the resistance is as indicated in the table using a tester.

- If not as indicated in the table, replace the power outer mirror. Power Outer Mirror Removal/Installation