Electric Compressor Inspection

ELECTRIC COMPRESSOR

Inspection


EQUIPOTENTIAL TEST

After installing the electric compressor, measure the resistance below.
- Between electric compressor (aluminum part) and body (ground bolt).
- Between electric compressor (aluminum part) and DC/DC-J/B (aluminum part).

WARNING:
To prevent electric shock hazards, be sure to wear protective gear.
Standard: Less than 0.1
If the result deviates from the standard value, check for paint, oil, dirt, or other substance adhering to the bolts or conductive mounting parts. If such substances are found, clean the surrounding area and remove foreign substances.