Installation

2ZR-FE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION

1. INSTALL V-RIBBED BELT

(a) Install the belt.

2. ADJUST V-RIBBED BELT

(a) Turn bolt C to adjust the tension of the V-ribbed belt.





(b) Tighten bolts A and B.

Bolt A - Torque : 19 Nm (190 kgf-cm, 14 ft-lbf)

Bolt B - Torque : 43 Nm (438 kgf-cm, 32 ft-lbf)

NOTICE:
Confirm that bolt D is not loosened.

3. INSPECT V-RIBBED BELT Testing and Inspection

4. INSTALL ENGINE UNDER COVER RH

5. INSTALL NO. 2 CYLINDER HEAD COVER