Repair Instruction - Initialization

INTRODUCTION: REPAIR INSTRUCTION: INITIALIZATION

1. PROCEDURES NECESSARY WHEN BATTERY TERMINAL IS DISCONNECTED/RECONNECTED

NOTICE:
It may not be possible to release the steering lock or start the engine when the battery voltage is low. If this occurs, initialization of the steering lock system is required. Programming and Relearning

2. PROCEDURES NECESSARY WHEN ECU OR OTHER PARTS ARE REPLACED









* *1: w/ Smart Key System

* *2: w/o Smart Key System

* *3: for U341E,U250E Automatic Transaxle

* *4: for 2AZ-FE

* *5: for 2ZR-FE