Ignition System: Operation: IGNITOR
- Turn ignition off. Unplug ignitor unit (left rear corner of engine compartment).
- Resistance between ignitor unit terminals "B" and "D" should be 111,000 ohms. Resistance between ignitor unit terminals "B" and "C" should be 1200 ohms. See Fig 1.
- With ignitor still disconnected, turn ignition to "RUN" position. Battery voltage should be present at following points:
- Terminal "C" (Black/Yellow) and ground.
- Terminal "D" (Blue) and ground.
- Terminals "C" (Black/Yellow) and "A" (Black).
Courtesy of AMERICAN HONDA MOTOR CO., INC.