Wheel Alignment Specifications
CAUTION:
Use extreme care when working around Supplemental Restraint System (SRS) wiring and components at front fender wells. All SRS wiring harnesses are covered with Yellow outer insulation. DO NOT damage this wiring.
WHEEL ALIGNMENT SPECIFICATIONS (INTEGRA)
| Application |
Specification: Fraction (Decimal) |
| Camber (Degrees) |
| Front |
-1/2 +/- 1 (-.5 +/- 1.0) |
| Rear |
-3/4 +/- 1/4 (-.75 +/- .25) |
| Caster (Degrees) |
| Front |
2 1/4 +/- 1 (2.25 +/- 1.0) |
| Rear |
N/A |
| Toe-In (Inches) |
| Front |
-3/64 +/- 7/64 (.042 +/- .118) |
| Rear |
5/64 +/- 5/64 (.083 +/- .083) |
| Toe-In (Degrees) |
| Front |
-5/64 +/- 15/64 (.083 +/- .236) |
| Rear |
11/64 +/- 11/64 (.166 +/- .166) |
| Toe-Out On Turns (Degrees) |
| Inner |
| Front |
|
| Rear |
|
| Outer |
| Front |
|
| Rear |
|
| Steering Axis Inclination (SAI) |
13 1/4° |
WHEEL ALIGNMENT SPECIFICATIONS (LEGEND)
| Application |
Specification: Fraction (Decimal) |
| Camber (Degrees) |
| Front |
0 +/- 1 (0.0 +/- 1.0) |
| Rear |
0 +/- 1 (0.0 +/- 1.0) |
| Caster (Degrees) |
| Front |
1 43/64 +/- 1 (1.66 +/- 1.0) |
| Rear |
N/A |
| Toe-In (Inches) |
| Front |
0 +/- 1/8 (0.0 +/- .125) |
| Rear |
0 +/- 5/64 (0.0 +/- .083) |
| Toe-In (Degrees) |
| Front |
0 +/- 1/4 (0.0 +/- .25) |
| Rear |
0 +/- 11/64 (0.0 +/- .166) |
| Toe-Out On Turns (Degrees) |
| Inner |
| Front |
|
| Rear |
|
| Outer |
| Front |
|
| Rear |
|
| Steering Axis Inclination (SAI) |
|