Shift Position Console Switch
NOTE:
Shift position console switch also contains back-up light switch and neutral safety switch. Back-up light switch and neutral safety switch can also be checked when checking shift position console switch.
- Remove center console. Disconnect shift position console switch 2-pin and 10-pin connectors, and note terminal identification. See Fig 1.
- Using an ohmmeter, check for continuity between specified terminals with the shift lever in the indicated positions. Refer to the SHIFT POSITION CONSOLE SWITCH CONTINUITY table.NOTE: Check continuity while moving shift lever back and forth in free play area of each gear position. DO NOT touch push button on shift lever when checking continuity.
- If continuity is not as specified, shift position console switch may require adjustment. See SHIFT POSITION CONSOLE SWITCH under REMOVAL & INSTALLATION. If correct continuity cannot be obtained by adjusting switch, replace switch assembly.
SHIFT POSITION CONSOLE SWITCH CONTINUITY
| Application | Shift Lever Position | Continuity Between Terminals |
|---|---|---|
| Shift Position Console Switch | ||
| ..... | Park | 6 & 7 |
| ..... | Reverse | 4 & 7 |
| ..... | Neutral | 5 & 7 |
| ..... | "D" | 1, 7 & 10 |
| ..... | "S" | 1, 7 & 9 |
| ..... | "2" | 1, 7 & 8 |
| Back-Up Light Switch | ||
| ..... | Reverse | 2 & 3 |
| Neutral Safety Switch | ||
| ..... | Park | 11 & 12 |
| ..... | Neutral | 11 & 12 |