Gear Position Switch
- Shift to PARK position, and loosen the gear position switch mounting bolts.
- Slide the switch within 0.08" (2.0 mm) of the direction of the PARK position until there is continuity between terminals No. 8 and No. 11 in the range of free play of the shift lever. See Figure and Fig 1 . If adjustment is not possible, check for damage to the shift lever detent and/or bracket. If there is no damage, replace the A/T gear position switch.
- Recheck for continuity between each of the terminals. You should be able to start the engine with the shift lever in Neutral position within the range of free play.