Power Mirror Switch Test
Remove power mirror switch. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Check for continuity between specified switch terminals with switch in each position. If continuity is not as specified, replace switch. See Fig 1 . See POWER MIRROR SWITCH CONTINUITY TEST table.
POWER MIRROR SWITCH CONTINUITY TEST
| Application | Terminal Number | |||
|---|---|---|---|---|
| Motor Switch - Right Mirror | ||||
| Off | 3-4-5-6 | |||
| Up | 3-7 | |||
| Down | 4-7 | |||
| Left | 3-7; 5-7 | |||
| Right | 4-7 | |||
| Motor Switch - Left Mirror | ||||
| Off | 1-2-3-6 | |||
| Up | 3-7 | |||
| Down | 1-7; 2-7 | |||
| Left | 1-7; 3-7 | |||
| Right | 2-7 | |||
| Defogger Switch | ||||
| On | (1) 6-8-9 | |||
| Off | No Continuity | |||
|
||||