LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1994 >> NSX Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock >> Bleeding >> Relieving System Pressure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Relieving System Pressure

  1. Drain brake fluid from master cylinder and modulator reservoir. Remove Red bleed screw cap from maintenance bleed screw. See Figure .
  2. Using Bleeder "T" Wrench (07HAA-SG00100 or 07HAA-SG00101), loosen maintenance bleed screw 1/4 turn to release high pressure fluid into reservoir. Turn "T" wrench one complete turn to relieve remaining accumulator line pressure. Tighten bleed screw, and install Red cap.
scientia non olet · About LEMON Manuals