LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1995 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Instrument Panel) >> Testing >> Integrated Control Unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Integrated Control Unit

WARNING: This page is about a different car, the 1996 Acura Integra. However, it is still accessible from the selected car via links, so may be relevant.

Remove integrated control unit from under dash fuse and relay panel. Test each circuit of integrated control unit connector for continuity or voltage as indicated. See Fig 1 -Fig 5 . Correct any problems found. If no problems are found, replace integrated control unit.

NOTE: Turn signal/hazard relay fuse No. 20 (10-amp) has replaced turn signal/hazard relay fuse No. 26 (10-amp). See SIDE MARKER LIGHT FLASHER SYSTEM: TESTING, in Fig 5 . See WIRING DIAGRAMS  .
Fig 1: Integrated Control Unit Connector Terminals (1 Of 2)
G94J46937Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 2: Integrated Control Unit Connector Terminals (2 Of 2)
G94A46938Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 3: Testing Integrated Control Unit (1 Of 3)
G94C46484Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 4: Testing Integrated Control Unit (2 Of 3)
G94D46485Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 5: Testing Integrated Control Unit (3 Of 3)
G94E46486Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals