LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1995 >> Legend SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - System/Component Tests) >> Idle Control System >> Engine Controls - System/Component Tests >> Brake Switch Signal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Brake Switch Signal

WARNING: This page is about a different car, the 1994 Acura Legend. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ensure stoplights operate properly. Connect ECM Test Harness (07LAJ-PT3010A ) to ECM main harness. DO NOT  connect test harness to ECM. Measure voltage between test harness terminals D2 (positive) and A26 (negative). See Figure .
  2. Depress brake pedal. If battery voltage is present, switch is okay. If battery voltage is not present, repair open in Green/White wire and ECM terminal D2.
scientia non olet · About LEMON Manuals