Power Unit: Notes
CAUTION:
Do not attempt to disassemble power unit except for those components shown in illustration. See . Do not spill brake fluid on vehicle; it may damage the paint. If brake fluid does contact paint, wash it off immediately with water. To prevent spills, cover the hose joints with rags or shop towels. Clean all parts in brake fluid and air dry. Blow out all passages with compressed air. Before reassembling, Ensure all parts are free of dust and other foreign particles. Replace parts with new ones whenever specified to do so. Ensure no dirt or other foreign matter is allowed to contaminate the brake fluid. Do not mix different brands of brake fluid as they may not be compatible. Do not reuse the drained fluid. Use only clean DOT 3 or 4 brake fluid.