Confirming Wake-Up Mode

After confirming sleep mode, turn each of the following switches to ON position and wake up each multiplex control unit.

Door multiplex control unit switches:

• Driver's door switch.
• Driver's door key cylinder switch (LOCK/UNLOCK).
• Driver's door lock switch (LOCK/UNLOCK).
• Driver's door lock knob switch (LOCK/UNLOCK).
• Trunk opener switch
• Power window master switch, except driver's switch. Driver's multiplex control unit switches:
• Headlight switch.
• Front fog light switch.
• Instrument cluster lights, brightness control.
• Left rear door switch.
• Left rear door lock knob switch (UNLOCK).
• Trunk key cylinder switch.
• Driver's seat belt switch.
• Windshield wiper/washer switch, except MIST switch.
• Brake switch.
• Vehicle Speed Sensor (VSS).
• Parking brake switch.
• A/T gear position switch (REVERSE). Passenger's multiplex control unit switches:
• Hood switch.
• Trunk latch switch.
• Radio switch.
• Trunk opener main switch.
• Front passenger's door switch.
• Front passenger's key cylinder switch (LOCK/UNLOCK).
• Front passenger's door lock switch (LOCK/UNLOCK).
• Front passenger's door lock knob switch (UNLOCK).
• Right rear door switch.
• Right rear door lock knob switch (UNLOCK).
• Keyless entry transmitter (LOCK, UNLOCK, TRUNK, and PANIC buttons).
• Rear window defogger switch.
• Engine oil pressure switch (ON or OFF).
• Generator ("L" terminal).

If all applications operate properly, wake-up mode is okay. If any multiplex control unit is faulty and cannot wake up, several parts of multiplex system will not operate at the same time.