Driver's Power Seat Motor Test
Remove driver's seat. See FRONT SEAT under REMOVAL & INSTALLATION. Disconnect each power seat motor. See Fig 1. Apply battery voltage to each motor as specified in DRIVER'S POWER SEAT MOTOR TEST table. If any motor fails any portion of test, replace faulty motor.
DRIVER'S POWER SEAT MOTOR TEST
| Switch Position | Battery To Seat Motor Terminals (+) & (-) | |
|---|---|---|
| Slide Motor | ||
| Forward | C1 & C2 | |
| Backward | C2 & C1 | |
| Front Up-Down Motor | ||
| Up | C1 & C2 | |
| Down | C2 & C1 | |
| Rear Up-Down Motor | ||
| Up | C1 & C2 | |
| Down | C2 & C1 | |
| Recline Motor | ||
| Forward | C3 & C4 | |
| Backward | C4 & C3 | |