Transmission Position Sensor/Switch: Service and Repair

SRS components are located in this area. Review the SRS component locations, precautions, and procedures under Air Bags before performing repairs or service.

1. Remove the front console.
2. Disconnect the A/T gear position switch connector (12P) and the neutral switch connector (2P).
3. Remove the A/T gear position switch from the shift lever mounting bracket.
4. Position the switch slider of the new A/T gear position switch to [N] position.
5. Move the shift lever to [N] position, then install the A/T gear position switch while aligning the switch slider with the switch slider guide pin.
6. Test the A/T gear position switch.
7. Connect the connectors.