Section 24 (A/C-Heater System): Testing: Relays

WARNING: This page is about a different car, the 1998 Acura 3.0CL and 1998 Acura 2.3CL. However, it is still accessible from the selected car via links, so may be relevant.

Remove appropriate relay. Continuity should not exist between terminal No. 1 and 3. See Fig 1 - Fig 3 . Connect battery voltage to terminal No. 2 and ground terminal No. 4. Continuity should exist between terminal No. 1 and 3. If continuity is not as specified, replace relay.

Fig 1: Blower Motor Relay & Radiator Fan Relay Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Condenser Fan Relay & Compressor Clutch Relay Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 3: Blower Motor High Relay Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.