Air Conditioning (HVAC) System

STANDARD SPECIFICATION

MEASUREMENT

STANDARD (NEW)

Air Conditioning system

Lubricant type: SP - 10 (P/N 38899 - P13 - A01 or 38897 - P13 - A01AH) (For refrigerant: HFC - 134a (R - 134a))

Lubricant capacity

Condenser

20 (2/3 0.7)

m l (fl 02, lmp oz)

Evaporator

45 (1 1/2, 1.6)

Line or hose

10 (1/3, 0.4)

Receiver

10 (1/3, 0.4)

Compressor

Lubricant type: SP - 10 (P/N 38899 - P13 - A01 or 38897 - P13 - A01AH) (For refrigerant: HFC - 134a (R - 134a))

Lubricant capacity m l (fl oz. lmp oz)

130 - 150 (4 1/3 - 5, 4.6 - 5.3)

Field coil resistance at 68°F (20°C) Ω

3.05 - 3.35

Pulley-to-pressure plate clearance

0.5 ± 0.15 (0.020 ± 0.006)

Compressor belt⁽¹⁾

Deflection with 98 N (10 kgf, 22 lbf)

7.5 - 9.5 (0.30 - 0.37) with used belt

between pulleys

5.0 - 6.5 (0.20 - 0.26) with new belt

Belt tension N (kgf, lbf)

340 - 490 (35 - 50,77 - 110) with used belt

Measured with belt tension gauge

690 - 830 (70 - 85,154 - 187) with new belt

⁽¹⁾	When using a new belt, adjust deflection or tension to new values. Run the engine for 5 minutes then turn it off.

Readjust deflection or tension to used belt values.