Neutral Position Memorization
NOTE:
To ensure accuracy, the vehicle must be level.
- Clear the DTC.
- Short the Service Check Signal circuit. See Service Check Signal Circuit Method .
- Release the parking brake.
- Press the brake pedal, and hold it.
- Turn the ignition switch ON (II).
- After the ABS indicator goes off, apply the parking brake, release the parking brake, and apply it again.
- The VSA activation indicator blinks twice in 2 seconds, and the indicator goes off. If the indicator does not go off, repeat from step 1 .
- Turn the ignition switch OFF, then remove the Honda PGM Tester from the data link connector.