Cruise Control Main Switch
WARNING: This page is about a different car, the 2003 Acura 3.2TL and 2002 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
- Remove Traction Control System (TCS) and cruise control main switch from driver's switch panel. Disconnect main switch 8-pin connector. With switch in OFF position, continuity should exist between switch terminals No. 1 and 2, and between terminals No. 4 and 7. See Fig 1. Go to next step.
- With main switch in ON position, continuity should exist between switch terminals No. 1 and 2, and between terminals No. 4, 5 and 7. See WIRING DIAGRAMS . If continuity is not as specified, check bulbs and replace as necessary. If bulbs are okay, replace TCS/cruise control main switch.