LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2000 >> 3.2TL >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Anti-Theft & Keyless Entry Systems) >> System Tests >> Multiplex Control Unit Tests >> Passenger's Multiplex Control Unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Passenger's Multiplex Control Unit

WARNING: This page is about a different car, the 2003 Acura 3.2TL and 2002 Acura 3.2TL. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove passenger's underdash fuse/relay box. See PASSENGER'S UNDERDASH FUSE/RELAY BOX  under REMOVAL & INSTALLATION. Remove passenger's multiplex control unit from passenger's underdash fuse/relay box. Disconnect passenger's multiplex control unit 22-pin connector. Inspect connectors and terminals. Check for bent, loose or corroded terminals. Perform passenger's multiplex control unit input tests. See Fig 1 and Fig 2 . Repair as necessary and recheck system operation. If passenger's multiplex control unit inputs are okay, go to next step.
  2. Reconnect passenger's multiplex control unit to underdash fuse/relay box. Perform input tests as specified at back side of passenger's fuse/relay box (backprobe). See Fig 1 and Fig 3 . Repair as necessary. If all tests are okay, reconnect passenger's multiplex control unit 22-pin connector and go to DOOR MULTIPLEX CONTROL UNIT  .
Fig 1: Identifying Passenger's Multiplex Control Unit Terminal Connectors
G00215773Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 2: Passenger's Multiplex Control Unit Input Test
G00215774Courtesy of AMERICAN HONDA MOTOR CO., INC.
Fig 3: Passenger's Multiplex Control Unit Input Test
G00215775Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals