LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2000 >> 3.5RL >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Multiplex Control Systems >> System Tests >> Multiplex Control System Service Connector
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Multiplex Control System Service Connector

  1. Check continuity between multiplex control system Green 2-pin service connector terminal No. 1 (Black wire) and ground. If continuity exists, go to next step. If continuity does not exist, repair open in Black wire and/or bad ground connection.
  2. Remove passenger's multiplex control unit. Passenger's multiplex control unit is located behind right kick panel. Disconnect passenger's multiplex control unit 22-pin connector "B". Remove driver's underdash fuse/relay box located under instrument panel. See DRIVER'S UNDERDASH FUSE/RELAY BOX  under REMOVAL & INSTALLATION. Disconnect driver's multiplex control unit from underdash fuse/relay box. Disconnect driver's multiplex control unit 14-pin connector "A". Go to next step.
  3. Check continuity in Pink/Black wire between Green 2-pin service connector terminal No. 2, driver's multiplex control unit 14-pin connector "A" terminal No. 10 and passenger's multiplex control unit 22-pin connector "B" terminal No. 22. See WIRING DIAGRAMS  . See Figure , Figure and Figure .
  4. If continuity does not exist, repair open in Pink/Black wire and retest system. If wires are okay and any multiplex control unit appears faulty, replace faulty multiplex control unit with a known-good unit and retest system.
scientia non olet · About LEMON Manuals