Service Specifications

Cylinder Head Warpage:
- If warpage is less than 0.05 mm (0.002 inch) cylinder head resurfacing is not required.
- If warpage is between 0.05 mm (0.002 inch) and 0.2 mm (0.008 inch), resurface cylinder head.
- Maximum resurface limit is 0.2 mm (0.008 inch) based on a height of 142 mm (5.59 inches)

Cylinder Head Height:
Standard (New) 141.95-142.05 mm (5.589 - 5.593 inches)