LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2000 >> Integra GS-R, 4D Sedan >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 1.8L VTEC 4-CYL >> Overhaul >> Cylinder Block Assembly >> Piston Pin Inspection
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Piston Pin Inspection

  1. Measure diameter of piston pin. Zero dial indicator to piston pin diameter. Insert dial indicator into piston pin bore to measure piston pin-to-piston clearance. If clearance exceeds specification, install oversize piston pin and recheck clearance. See PISTONS, PINS & RINGS  table under ENGINE SPECIFICATIONS.
  2. Measure difference between piston pin diameter and connecting rod small end diameter. Ensure interference fit between piston and connecting rod is within specification. See PISTONS, PINS & RINGS  table under ENGINE SPECIFICATIONS.
scientia non olet · About LEMON Manuals