Engine Identification
WARNING: This page is about a different car, the 2001 Acura Integra. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For repair procedures not covered in this article, see ENGINE OVERHAUL PROCEDURES
article in GENERAL INFORMATION.
Engine identification code is stamped on right rear of cylinder block as viewed from flywheel, below cylinder head mating surface. The first 5 characters of the code indicate engine type. See ENGINE IDENTIFICATION CODE . The last 7 numbers of the code indicate engine serial number.
ENGINE IDENTIFICATION CODE
| Application | Code |
|---|---|
| 1.8L | B18B1 |