Passenger's Window Motor Test

WARNING: This page is about a different car, the 2003 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.

Remove the passenger's door panel .
Disconnect the 2P connector from the window motor.

Fig 1: Disconnecting The Connector From The Window Motor
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the motor by connecting battery power and ground according to the table. When the motor stops running, disconnect one lead immediately.

Fig 2: Passenger's Window Motor Test
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the motor does not run or fails to run smoothly, replace it.