MDX & 3.2CL
- Shift transmission into Reverse. Remove center console. Remove lock nut securing cable to selector, then remove cable from selector. Rotate cable socket counterclockwise 1/4 turn, then remove shift cable from bracket base. See Fig 1
.
- Push shift cable in until it stops, then pull back one detent positioning cable to "R" position. Turn ignition on and verify "R" indicator light on instrument cluster is illuminated. Turn ignition off.
- Insert a .24" (6.0 mm) pin into shift lever bracket base through positioning hole on shift lever assembly. See Figure
. Position shift cable into shift cable bracket by rotating cable socket counterclockwise 1/4 turn. Insert shift cable socket onto shift lever mounting stud. Install shift cable lock nut, then tighten lock nut to specification. See TORQUE SPECIFICATIONS
. Remove pin from shift lever. Start engine and check shift lever operation of all gears.
Courtesy of AMERICAN HONDA MOTOR CO., INC.