Removal & Installation (Integra)
WARNING: This page is about a different car, the 2001 Acura MDX, 2001 Acura Integra, 2001 Acura 3.5RL, 2001 Acura 3.2TL, and 2001 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect negative battery cable. Remove right door sill molding and right kick panel. Pull carpet back to expose PCM cover. Remove PCM cover. Disconnect electrical connectors. Remove PCM. To install, reverse removal procedure. To reprogram PCM, ensure transaxle is in Neutral or Park. Ensure all accessories are off. Run engine at 3,000 RPM until radiator fan comes on. Allow engine to idle for 5 minutes.