Removal & Installation (MDX)
WARNING: This page is about a different car, the 2001 Acura MDX, 2001 Acura Integra, 2001 Acura 3.5RL, 2001 Acura 3.2TL, and 2001 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.
PCM is located in front and to right of console. Disconnect negative battery cable. Remove passenger side console trim. Remove bolt holding intake manifold runner control (IMRC) module. Remove two nuts holding IMRC module bracket. Remove bolt and nut from PCM. Remove PCM connectors. Remove PCM. To install, reverse removal procedure.