'03-04 Models

Remove the driver's airbag assembly (see DRIVER'S AIRBAG REPLACEMENT ).
Disconnect the 5P connector (A), the 1P connector (B) and the 1P connector (C) from the radio remote switch (D).

Fig 1: Disconnecting Connectors From Radio Remote Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Measure the resistance between the 5P connector No. 1 terminal and 1P connector (C) in each switch position according to Fig 2 .

Fig 2: Measuring Resistance Between 5P Connector Terminal 1 And 1P Connector In Each Switch Position Chart
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the resistance is not as specified, go to step 5.
Remove the four screws and the cruise control set/ resume/cancel switch (E) from the steering wheel.
Remove the four screws and the radio remote switch.