Resetting the Power Window Control Unit: Notes

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Resetting the power window control unit is required when any of the following have occurred:

Power window regulator replacement or repair.
Power window motor replacement or repair.
Window run channel replacement.
Door glass replacement or repair.
Driver's MPCS unit replacement.
Front passenger's MPCS unit replacement.
Power is removed from the Driver's or front passenger's MPCS unit while the power window timer is ON.

NOTE: If the passenger's window has lost power when the key off timer is ON, it cannot be operated from the driver's switch and must be reset from the passenger's power window switch.