Rearview Camera Inputs and Outputs for 6P Connector

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rearview Camera Connector 6P Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Rearview Camera 6P Connector

REARVIEW CAMERA 6P CONNECTOR TERMINAL REFERENCE

Terminal Number

Wire Color

Terminal Name

Description

Voltage (about)

Symptom

RED

CAMERA ADPT (Adaptive camera)

Control signal for rearview camera

0 V

If open: No change to rearview camera image.
If short to ground: No change to rearview camera image.

GRY⁽¹⁾

CAMERA SH (Shield and ground for camera)

Shield for No. 5 terminal

0 V

If open: No rearview camera image.
If short to ground: No change to rearview camera image.

BLK

CAMERA VIDEO (Video camera)

Video signal for rearview camera

0.3 V

If open: No rearview camera image.
If short to ground: When put into reverse, navigation screen goes black (display backlight still operative).

WHT

CAMERA VCC (VCC supply)

Power source for rearview camera

8 V

If open: No rearview camera image.
If short to ground: When put into reverse, navigation screen goes black (display backlight still operative).

⁽¹⁾	The shielded wires have a heat-shrunk tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the schematic.