Save users Memory: Import

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

After installing the client's original DVD in the new core, allow the system to boot up. Insert the PC card in the new core and enter the navigation diagnostic mode.

Fig 1: Save Users Memory Screen Display - Import

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Select YES on the Import Confirmation screen.

Import moves the two files stored by the Export process from the PC card to the new navigation unit. When the transfer is finished (a few seconds) the system will automatically reboot. After the system reboots, remove the PC card from the PC slot.

If the Import button is grayed out, follow the troubleshooting in the FAQs below. The client's files can only be transferred to a new core if the Model and the Program Flash shown on the Version screen are the same. These files cannot be transferred from TSX to MDX, or from a MDX with version 1.07.00 to a MDX with version 1.32.00.