Radiator Cap Test
WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the radiator cap (A). Wet its seal with engine coolant, then install it on a commercially available pressure tester (B).
- Apply a pressure of 93-123 kPa (0.95-1.25 kgf/cm2 , 14-18 psi).
- Check for a drop in pressure.
- If the pressure drops, replace the cap.