Both mirrors
- 5. Check for voltage between the No. 2 terminal and body ground with the ignition switch ON (II).
There should be battery voltage.
- If there is no battery voltage, check for:
- Blown No. 14 (10 A) fuse in the under-dash fuse/relay box.
- An open in the BLK/YEL wire.
- If there is battery voltage, go to step 6.
- If there is no battery voltage, check for:
- 6. Check for continuity between the No. 6 terminal and body ground.
There should be continuity.
- If there is no continuity, check for:
- An open in the BLK wire.
- Poor ground (G401).
- If there is continuity, check both mirrors individually as described in the next column.
- If there is no continuity, check for: