Traction Control System (TCS)
- Remove Traction Control System (TCS) and cruise control main switch from driver's switch panel. Disconnect main switch 6-pin connector. With switch in OFF position, continuity should not exist between switch terminals No. 1 and No. 2, and between terminals No. 3 and No. 4. See Fig 1
. Go to next step.
- With main switch in ON position, continuity should exist between switch terminals No. 1 and 2, and between terminals No. 3 and 4. See WIRING DIAGRAMS
. If continuity is not present as specified, replace TCS/cruise control main switch.
Courtesy of AMERICAN HONDA MOTOR CO., INC.