LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2004 >> MDX Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Navigation System) >> Display Unit Removal/Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Display Unit Removal/Installation

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the dashboard upper visor (see SPEAKER TEST/REPLACEMENT ).
  2. Remove the two screws (A) and bolt (B), then remove the display unit (C).
    Fig 1: Identifying Display Unit, Screws And Bolt
    G05488693Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the navigation display connector (D).
  4. Install the unit in the reverse order of removal. Be careful not to drop the forward bolt behind the dashboard.
scientia non olet · About LEMON Manuals