Section 75 (Ignition Switch): Replacement

WARNING: This page is about a different car, the 2009 Acura MDX, 2008 Acura MDX, and 2007 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.

SRS components are located in the area. Review the SRS component locations (see COMPONENT LOCATION INDEX ) and precautions and procedures (see PRECAUTIONS AND PROCEDURES ) before performing repairs or servicing.

Do the battery terminal disconnection procedure(See DISCONNECTION .
Remove the steering column covers (see COLUMN COVER REMOVAL/INSTALLATION ).
Disconnect the 7P connector (A) from the ignition switch (B).

Fig 1: Identifying 7P Connector And Ignition Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the two screws and the ignition switch.
Install the parts in the reverse order of removal.
Do the battery terminal reconnection procedure (See RECONNECTION ).