Horn Test/Replacement

Remove the front bumper.
- '02-04 models (see FRONT BUMPER REMOVAL/INSTALLATION )
- '05-06 models (see '05-06 MODELS )
Disconnect the 1P connector (A), and remove the horn (B).

Fig 1: Disconnecting 1P Connector, And Removing Horn
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Test the horn by connecting battery power to the terminal (A) and ground to the bracket (B). The horn should sound.

Fig 2: Testing Horn By Connecting Battery Power To Terminal And Ground To Bracket
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If it fails to sound, replace it.
Install the horn in the reverse order removal.