'03-04 Models
- Remove the driver's airbag assembly (see DRIVER'S AIRBAG REPLACEMENT ).
- Disconnect the 5P connector (A), the 1P connector (B) and the 1P connector (C) from the radio remote switch (D).
- Measure the resistance between the 5P connector No. 1 terminal and 1P connector (C) in each switch position according to Fig 2 .
- If the resistance is not as specified, go to step 5.
- Remove the four screws and the cruise control set/ resume/cancel switch (E) from the steering wheel.
- Remove the four screws and the radio remote switch.