Forced Starting of Display

Slide the passenger's seat (A) forward.

Fig 1: Sliding Passenger's Seat Forward
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Connect the SCS service connector (B) to the navigation service check connector (C) located behind the navigation unit.
Turn the ignition switch ON (II).
Check that the system starts up and then changes to the "Navi System Link" screen.
NOTE: If the system fails to display the "Navi System Link" screen, refer to No picture is displayed (see SYMPTOM TROUBLESHOOTING ).

Fig 2: Identifying Display "Navi System Link" Screen
Courtesy of AMERICAN HONDA MOTOR CO., INC.