LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2005 >> MDX V6-3471cc 3.5L >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> ATF Temperature Sensor Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

ATF Temperature Sensor Replacement

ATF Temperature Sensor Replacement
1. Remove the splash shield.





2. Disconnect the ATF temperature sensor connector (A), then remove the connector from the connector bracket (B).
3. Remove the harness clamp (C) from its bracket (D).
4. Remove the ATF temperature sensor, and replace with new one.
5. Install the new ATF temperature sensor (E) and a new O-ring (F).
6. Install the ATF temperature sensor connector to the connector bracket, then connect the connector.
7. Install the harness clamp on its bracket.
8. Install the splash shield.

scientia non olet · About LEMON Manuals