LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2005 >> NSX 3.0 NA1 >> Repair and Diagnosis >> Engine Performance >> Specifications >> Engine Controls - Service & Adjustment Specifications >> Quick-Service >> Normal Service Conditions
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Normal Service Conditions

REPLACEMENT INTERVALS

Component Months Miles
Air Filter 24 30,000
Automatic Transaxle Fluid (1) 72 (1) 120,000
Brake Fluid (Including Anti-Lock) 36 (2)
Coolant (3) 120 (3) 120,000
Engine Oil & Filter 12 7500
Fuel Filter 48 60,000
Manual Transaxle Fluid 72 120,000
Spark Plugs 84 105,000
Timing Belt 84 105,000
(1) First change is at 72 months/120,000 miles and every 60 months/90,000 miles thereafter.
(2) Every 36 months regardless of Mileage.
(3) First change is at 120 months/120,000 miles and every 60 months/60,000 miles thereafter.
INSPECTION INTERVALS

Component Months Miles
All Fluid Levels 12 15,000
Brakes
Brake Hoses & Lines (Including Anti-Lock Brake System) 12 15,000
Brake Calipers, Discs & Rotors 12 15,000
Brake Pads 12 15,000
Parking Brakes 12 15,000
Cooling System Hoses & Connections 12 15,000
Drive Belts 24 30,000
Driveshaft Boots 12 15,000
Engine Oil & Coolant (1) (1)
Exhaust System 12 15,000
Fuel Lines & Connections 12 15,000
Idle Speed & Idle CO 84 105,000
SRS 120 (2)
Suspension Components 12 15,000
Tie Rod Ends, Steering Gearbox & Steering Rack Boots 12 15,000
Tire Inflation & Condition 1 (3)
Valve Clearance 84 105,000
Water Pump 84 105,000
(1) Check At Every Fuel Stop
(2) 10 Years After Production
(3) At Least Once A Month
BELT ADJUSTMENT - TENSION GAUGE METHOD (1)

Application New Belt Used Belt
Generator 198-243 lbs. (90-110 kg) 99-143 lbs. (45-65 kg)
Compressor 150-200 lbs. (70-90 kg) 77-120 lbs. (35-55 kg)
(1) Belt tension is measured at center of longest belt run.
BELT ADJUSTMENT - DEFLECTION METHOD (1)

Application New Belt Used Belt
Generator 0.24-0.31" (6-8 mm) 0.43-0.53" (11-13.5 mm)
Compressor 0.22-0.30" (5.5-7.5 mm) 0.39-0.47" (10-12 mm)
(1) Belt deflection is measured at center of longest belt run at 22 lbs. (10 kg) pressure.