LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 2006 >> RL >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> PGM-FI System >> MAP Sensor Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

MAP Sensor Replacement

  1. Remove the engine cover (see step 1 under INTAKE MANIFOLD REMOVAL AND INSTALLATION ).
  2. Disconnect the MAP sensor connector (A).
    Fig 1: MAP Sensor Connector And Screw With Torque Specifications
    G05494511Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the screw (B).
  4. Remove the MAP sensor (C).
  5. Install the parts in the reverse order of removal with a new O-ring (D).
scientia non olet · About LEMON Manuals