Gauge Control Module Replacement

WARNING: This page is about a different car, the 2008 Acura TL and 2007 Acura TL. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before replacing the gauge control module, do the "Rewriting the ODO Data on a New Gauge Control Module" (see REWRITING THE ODO DATA ON A NEW GAUGE CONTROL MODULE ).

Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
Remove the screws from the gauge control module (A), and spread a protective cloth (B) on the upper column cover.

Fig 1: Identifying Gauge Control Module
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Disconnect the connectors (C), and remove the gauge control module.
Install the gauge in the reverse order or removal.